Lectrosonics SPN32i 2RU ASPEN Input Only Digital Matrix Audio Processors

SKU: #SPN32i
Lectrosonics
Add to wishlist
Compare

Features

  • Unlimited input expansion
  • TCP/IP Ethernet Addressable
  • Seamless auto-mixing with PGA
  • 48-channel mix bus with full output matrixing
  • Simultaneous multi-point 3rd party and native control
  • Ultra-low 1.33 ms near-side latency for real-time audio

$6,159.00

Lectrosonics SPN32i Overview

Lectrosonics SPN32i 32-Channel 2RU Input Only Digital Matrix Audio Processors is designed to add inputs to your ASPEN system easily with the 16i input-only units. High-resolution, low-noise microphone preamplifiers featuring true 48 V phantom power provide studio-grade mic/line inputs for your audio system. The 1 Gbs ASPEN port ties these units to others in the stack with ultra-low latency of 1.46 ms for the 32i.

 

SKU: SPN32i Category:
Brand

No of Channel 32 Channels
Max. input level 20 dBu
Gain 0 dB to 56 dB, programmable in 8 dB steps (the analog gain is automatically selected by selecting the input gain)
Input impedance 8k Ohms differential mode, 2k Ohms common mode
Phantom voltage 48 V
Dynamic range 102 dB
EIN -127 dBu (20Hz – 20kHz, unweighted)
THD + noise 0.01%
Audio outputs: Nominal level 0 dBu, channels 1-8
Audio outputs: Headroom 20 dB
Audio outputs: Output impedance < 50 Ohms , all outputs, at all attenuator settings
Audio outputs: Dynamic range 105 dB
Audio outputs: THD + noise 0.01%
Single-board 64 audio samples = 1.333 ms
System 64 + 6 (total number or boards – 1) audio samples =1.333 + 0.125 * (total number or boards – 1) ms
Signal Any of the 48 final mixes
Output power 50 mW (
Noise reduction filters Adjustable 6 to 35 dB on every input
Tone control stages 4 per input channel
Parametric EQ stages 8 per output channel
ADFE 8 per input channel
Filter types: Low Pass Butterworth (6, 12, 18, 24 dB/octave)
Bessel (6, 12, 18, 24 dB/octave)
Linkwitz-Riley (12, 24 dB/octave)
Additional parameters: frequency [Hz]
Filter types: High Pass Butterworth (6, 12, 18, 24 dB/octave)
Bessel (6, 12, 18, 24 dB/octave)
Linkwitz-Riley (12, 24 dB/octave)
Additional parameters: frequency [Hz]
Filter types: Low Shelving Butterworth (6, 12, 18, 24 dB/octave)
Bessel (6, 12, 18, 24 dB/octave)
Additional parameters:
frequency [Hz]
boost/cut [dB]
Filter types: High Shelving Butterworth (6, 12, 18, 24 dB/octave)
Bessel (6, 12, 18, 24 dB/octave)
Additional parameters:
frequency [Hz]
boost/cut [dB]
Peaking EQ (parametric) Parameters Frequency [Hz]
bandwidth [octave]
boost/cut [dB]
Swept sine: Modes Single sweep, continuous sweep
Swept sine: Waveforms Sawtooth (up or down), triangle
Swept sine: Sweep rate Linear, logarithmic
Swept sine: Parameters Start freq, stop freq, level [dBu], sweep time [sec]
Parameter White noise: level [dBu]
Pink noise: level [dBu]
Tone (sine wave): level [dBu], frequency
Power Requirements 100-240 VAC, 50/60 Hz
Power Consumption 45 Watts
Dimensions 3.50 x 19 x 7.70″ / 88.9 x 482.6 x 195.6mm
Weight 5.73lbs / 2.59kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Lectrosonics SPN32i 2RU ASPEN Input Only Digital Matrix Audio Processors”

There are no reviews yet.

Related products

Brands Carousel

SHOPPING CART

close