Lectrosonics SPN1624 2 RU Digital Matrix Audio Processor, 16 Inputs, 24 Outputs

SKU: #SPN1624
Lectrosonics

Features

  • Ultra low noise input preamps
  • Full crosspoint matrix with 48 outputs
  • Unlimited input expansion
  • TCP/IP Ethernet addressable
  • Seamless auto-mixing with PGA at the matrix crosspoints
  • Simultaneous multi-point 3rd party and native control
  • Ultra-low latency
  • Automatic Master/Slave detection
  • Single CAT6 interconnection carries data, audio and control signals

$6,039.00

Lectrosonics SPN1624 Overview

Lectrosonics SPN1624 2 RU Digital Matrix Audio Processor offers unlimited input expansion and 48 mix buses give you phenomenal scalability. The Proportional Gain Algorithm provides seamless auto-mixing and integrates easily with echo cancellation, analog mixing consoles or any other type of audio system. And with TCP/IP addressability for control through Ethernet, ASPEN is now part of your network.

 

SKU: SPN1624 Category:
Brand

Inputs 16 Mic/Line
Max. input level 20 dBu
Gain 0 dB to 56 dB, programmable in 8 dB steps (the analog gain is automatically selected by selecting the input gain)
Input impedance 8 KOhms differential mode, 2 KOhms common mode
Phantom voltage 48 V
Input dynamic range 102 dB
EIN -127 dBu (20Hz – 20kHz, unweighted)
THD + noise: 0.01%
Outputs 1-8 line level, 9-12 mic/line level, 13-19 line level, 20-24 mic/line level
Nominal level 1-8 line level (0dBu), 9-12 mic/line level(0, -20, -40 dBu), 13-19 line level (0 dBu), 20-24 mic/line level (0, -20, -40dBu)
Headroom 20 dB
Output impedance < 50 Ohms , all outputs, at all attenuator settings
Output dynamic range 105 dB
THD + noise 0.01%
Frequency response 20 Hz – 21 kHz +/- 1 dB
Latency Single-board: 64 audio samples = 1.333 ms
System: 64 + 6 (total number or boards – 1) audio samples = 1.333 + 0.125 (total number or boards – 1) ms
Monitor output (1/4″ headphone jack) Signal: any of the 48 final mixes
Output power: 50 mW (<50 Ohms impedance recommended)
Noise reduction filters Adjustable 6 to 35 dB on every input
Tone control stages 4 per input channel
Parametric EQ stages 8 per output channel
ADFE 8 per input channel Configurable as Static or Dynamic
Low Pass Butterworth (6, 12, 18, 24 dB/octave)
Bessel (6, 12, 18, 24 dB/octave)
Linkwitz-Riley (12, 24 dB/octave)
Additional parameters: frequency [Hz]
High Pass Butterworth (6, 12, 18, 24 dB/octave)
Bessel (6, 12, 18, 24 dB/octave)
Linkwitz-Riley (12, 24 dB/octave)
Additional parameters: frequency [Hz]
Low Shelving Butterworth (6, 12, 18, 24 dB/octave)
Bessel (6, 12, 18, 24 dB/octave)
Additional parameters:
frequency [Hz]
boost/cut [dB]
High Shelving Butterworth (6, 12, 18, 24 dB/octave)
Bessel (6, 12, 18, 24 dB/octave)
Additional parameters:
frequency [Hz]
boost/cut [dB]
Peaking EQ (parametric) Parameters:
frequency [Hz]
bandwidth [octave]
boost/cut [dB]
Internal Signal Generator Swept sine:
Modes: single sweep, continuous sweep
Waveforms: sawtooth (up or down), triangle
Sweep rate: linear, logarithmic
Parameters: start freq, stop freq, level [dBu], sweep time [sec]
White noise: Parameter: level [dBu]
Pink noise: Parameter: level [dBu]
Tone (sine wave): Parameters: level [dBu], frequency
Power Requirements 100-240 VAC, 50/60 Hz
Power Consumption 40 Watts
Rack Height 2 Ru
Dimensions 3.5 x 19 x 7.7″ / 88.9 x 482.6 x 195.58mm
Weight 5.73lbs / 2.6kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Lectrosonics SPN1624 2 RU Digital Matrix Audio Processor, 16 Inputs, 24 Outputs”

There are no reviews yet.

SHOPPING CART

close