Take full control of your live video production with the 8-Channel Tally Box from SKAARHOJ. The system supports up to eight tally lights and offers both program and preview tally. The lights can be connected one by one or in a daisy chain configuration with a maximum of three in a row. The Tally Box is compatible with Blackmagic Design ATEM, vMix, and TriCaster switchers.
SKAARHOJ 8-Channel Tally Box
Take full control of your live video production with the 8-Channel Tally Box from SKAARHOJ. The system supports up to eight tally lights and offers both program and preview tally. The lights can be connected one by one or in a daisy chain configuration with a maximum of three in a row. The Tally Box is compatible with Blackmagic Design ATEM, vMix, and TriCaster switchers.
• Program and preview tally
• Star connection
• Daisy chain connection
• LED indicator light for each output
• Tested with 656′-long cable
SKAARHOJ Tally Light
The Tally Light from SKAARHOJ is designed for use with the Tally Box System, allowing you to take full control during a live video production. The light features two LEDs, one facing the camera operator and a larger one facing the presenter. The operator LED shines red when on program and green when on preview. With the switch on the tally light, the LED can be dimmed when used in low-light conditions. The large main LED shines red and is visible for the presenter to know which camera is on program. It has an on/off switch on the light. The Tally Light has two RJ45 ports for connecting to the Tally Box and other lights, and an accessory shoe foot for mounting on cameras.
Technical Specifications
| Brand | |
|---|---|
| Bundle | 2x Tally Lights, 3x Tally Lights, 4x Tally Lights, 5x Tally Lights, 6x Tally Lights |
Related products
-
Controller Options
SKAARHOJ GPIO Controller with GPI Connector (ETH GPI Link)
Features:
• Control Popular Broadcast Devices
• 2 x 25-Pin Connectors, 16 GPO / 16 GPI
• UniSketch Web UI with Simple Dropdowns
• GPO with Relays Shorting to GND
• GPI with Isolators Shorted to GND
• USB and Cat 5e Cables IncludedSKU: ETH-GPI-Link-Opt-Dual-V1 -
-
Controller Options
SKAARHOJ GPI Triggers to SDI Tally
From the factory the box is configured to control camera IDs 1-8. When input 1-8 is closed to GND, the red tally flag for camera 1-8 respectively will be set on the SDI output from the box. Likewise input 9-16 (on the same DB25 connector) will result in green tally (preview) being set on the SDI output.
If you want tally control of camera IDs other than 1-8 or if you want just red tally for camera 1-16 for instance, you simply configure the inputs in the web interface.
The SDI input should be connected to your source for the camera return feed. This would typically be a program output and possibly enriched with CCU data via either an ATEM switcher, the SKAARHOJ RCP, or the Blackmagic Arduino Shield. The SDI Tally box passes through all CCU information and only overrides Tally information.
Camera Support
The Blackmagic 3G-SDI Arduino Shield supports the following formats: 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94 and 1080p60, but the camera doesn´t have to be running the same video format as the program input, so you can use cameras in Ultra HD while the camera protocol is sent over HD signal to the camera.SKU: SDI-GPI-Link-V1
