Panasonic AW-RP150 Touchscreen Remote Camera Controller
SKU: #AW-RP150
Feature
- Control up to 200 Compatible PTZ Cameras
- Serial Control 5 Cameras Directly
- Zoom/Focus Rocker Joystick
- Touch Panel GUI, Touch Focus & More
$4,495.00
Panasonic AW-RP150GJ Overview
Panasonic’s Touchscreen Remote Camera Controller allows you to control up to 200 compatible Panasonic PTZ cameras over IP via a switching hub. Or you can control five cameras via direct RS-422 connection. Please see the list of supported cameras in the Features section below. The controller features a zoom/focus rocker on the joystick for pan and tilt operations, many onboard buttons, and additional controls within the 7″ touchscreen LCD. It also has an SD card slot, which allows saving scene files, system settings files, and other camera settings as well as copying settings over to other cameras. The controller can run over Power-over-Ethernet or a 12V, 4-pin XLR power supply, sold separately.
Single-Operator Camera Control
A zoom/focus rocker mounted on the joystick manages pan and tilt operations for zoom and focus control and intuitive single-handed operation. The built-in 7″ touch display allows for easy and quick operation of all essential camera functions.~
Multiple-Camera Connection
IP connection via a switching hub can be used to control up to 200 remote cameras. Up to 5 remote cameras can be controlled in a serial connection.
Supported Cameras
- AW-UE150W/K
- AW-HR140
- AW-HE130W/K
- AW-HN130W/K
- AW-UE70W/K
- AW-UN70W/K
- AW-HE40 Series
- AW-HN40HW/HK
- AW-HE38HW/HK
- AW-HN38HW/HK
Touch Panel GUI
The touch panel GUI monitor supports camera image display during shooting as well as a variety of operations. The panel is equipped only with buttons that are frequently used, with menu and camera switching operations, indicators, and other functions consolidated in the touch panel GUI.
Touch Focus
The focus is quickly aligned to the area touched by tapping the screen. In addition, the “Focus in Red” display assists with aligning focus by framing the part that is in focus in red.
Settings Copied to Multiple Cameras
Scene files, system settings files, and other camera settings can be saved to an SD card. These settings can then be copied to multiple cameras via the SD card. This massively reduces on-location setup time when shooting at events with large numbers of cameras.
Smooth Cropped Images
When the controller is used with the AW-UE150W/K camera, the cropping function of the camera can be controlled remotely. Images output from the camera to the monitor can be cropped in three different locations displayed with colored frames (yellow/green/magenta), and fine-tuned with the joystick as you watch. Required images can be cropped precisely and simply.
Preset Memory for Simple Camera Control
Registration of the camera angle and other remote camera settings allows the settings to be easily recalled from the touch panel GUI monitor. Supported presets include pan and tilt position, focus position, white balance settings, crop position coordinates, zoom position, lens aperture (manual iris only), and gain.
Tracing Memory
The tracing memory function records a series of operations performed for the remote camera. Up to 5 minutes for 10 operations can be memorized for a single camera and that trajectory can then be reproduced. Supported presets include pan and tilt position, focus position, white balance settings, zoom position, lens aperture (manual iris only), and gain.
Tally/GPIO 1/GPIO 2
Input/output switched via menu settings.
| Weight | 5173 g |
|---|---|
| Dimensions | 472 × 388 × 333 mm |
| Brand |
| General | ||
|---|---|---|
| Power Requirements | 12 V DC (10.8 V to 13.2 V), DC 42 V to 57 V (Camera Input, PoE+ power supply) | |
| Current Consumption | 1.0 A (Connector Input), 0.6 A (PoE+ power supply) | |
| Ambient Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) | |
| Allowable Humidity Ranges | 10 % to 90 % (no condensation) | |
| Storage Temperature | -20 °C to 50 °C (-4 °F to 122 °F) | |
| Mass | Approx. 3.2 kg (7.05 lb) | |
| Dimensions (W x H x D) | 342 mm x 178 mm x 245 mm (13-15/32 inches x 7 inches x 9-21/32 inches) (excluding protrusions) |
|
| Connection Supported Equipment | IP/RS422 AW-UE150W/K, AW-HR140*1, AW-HE130W/K*1, AW-HN130W/K*1, AW-UE70W/K*1, AW-UN70W/K*1, AW-HE40 Series*1, AW-HN40HW/HK*1, AW-HE38HW/HK*1, AW-HN38HW/HK*1 |
|
| Input/Output Connectors | ||
| Input | DC 12 V IN | XLR 4‑pin |
| 3G-SDI IN | SMPTE292 / 75 Ω (BNC x 1) Supported formats: 1080/59.94p*2, 1080/50p*2, 1080/59.94i, 1080/50i, 1080/23.98p, 1080/25p, 1080/23.98PsF, 1080/25PsF |
|
| Output | 3G-SDI ACTIVE THRU OUT |
SMPTE292 / 75 Ω (BNC x 1) |
| Input/Output | IP CONT | 100BASE‑TX PoE+ input Connection cable: LAN cable, max. 100 m (328 ft) • When connecting the unit via a switching hub: Straight cable or a cross cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended • When connecting the unit directly: Crossover cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended |
| SERIAL CONT (RJ‑45) | RS‑422 (control signals for remote cameras) Connecting cable: Straight cable (category 5e or better shielded cable), max. 1000 m (3280 ft) |
|
| TALLY OUT | Open collector output (negative logic) Maximum voltage resistance DC 24 V, Maximum current 50 mA |
|
| TALLY/GPIO 1 | D‑sub 25‑pin, female, inch thread TALLY IN : 10 inputs (for receiving photocoupler signals) GPI : 6 inputs (for receiving photocoupler signals) GPIO : 5 inputs (for receiving photocoupler signals) or 5 outputs (open collector outputs, negative logic) • Input/output switched with menu settings |
|
| GPIO 2 | D‑sub 25‑pin, female, inch thread GPI : 10 inputs (for receiving photocoupler signals) GPIO : 10 inputs (for receiving photocoupler signals) or 10 outputs (open collector outputs, negative logic) • Input/output switched with menu settings Reserve connectors: 2 connectors (For future expansion feature) |
|
| LCD Display | 7-inch Touch Panel GUI Monitor (WVGA(800×480)) | |
| SD Memory Card Slot | SDHC / SDXC Memory Card Slot x 1 | |
| Connection Specifications | ||
| No. of Connectable Cameras | 200 (IP), 5 (RS422) | |
| No. of Camera Selection Buttons | 10 | |
| No. of Camera Groups | 20 (10 units per 1 group) | |
| Memory | ||
| Preset Memory | No. of memory presets 100 | |
| Tracing Memory | No. of cameras | Cam1 to Cam10 |
| Recording time, no. of memory settings | Maximum 5 min. total per camera, maximum of 10 settings per camera | |
| Other Functions | ||
| No. of User Assignable Buttons | 6 + up to 10 on the LCD menu | |
| Pan / Tilt Speed Adjustment | 7 levels | |
| TALLY LED Display Color: | green / red | |
Based on 0 reviews
Be the first to review “Panasonic AW-RP150 Touchscreen Remote Camera Controller”
Related products
-
Camera Controllers
SKAARHOJ PTZ Fly Controller with Hall-Effect Joystick
Features:
- PTZ Camera Control
- High-Precision Hall-Effect Joystick
- 4 x Encoder Knobs with OLED Displays
- 6 x Programmable Keys with OLED Displays
- PoE for Easy Setup
- UniSketch OS
- Micro-USB Programming Port
- Micro-USB & Network Cables Included
- 12V Power Supply Included
SKU: PTZ-Fly-J-V1 -
Camera Controllers
SKAARHOJ PTZ Pro Camera Controller
Features:
• IP PTZ Controller with PoE Support
• Supports Multiple PTZ Encoders
• 3-Axis Joystick, Dedicated Focus Knob
• RGB Backlit Keys with Labeling Presets
• Menu Navigation Keys
• UniSketch OS for Multiple Devices Cores
• Optional SDI and Joystick UpgradesSKU: PTZ-Pro-V1 -
Camera Controllers
SKAARHOJ Ptz Extreme 2020
PTZ Extreme is engineered with expansion and flexibility in mind.
On the left side you will find a professional grade zoom rocker and thumb roller in machined aluminum.
On the right side you get a world class Hall Effect joystick for precision movement.
The lower 12 keys are usually mapped to destination selection (camera) and all knobs and buttons beyond that are equipped with crisp OLED displays so their function and value will adapt to any day at work.
This controller is designed for new ways of working with PTZ cameras as well as slider and dolly tracks on a complex broadcast set.
It will increase in value over time as more and more robotic systems will be supported in UniSketch through new device cores we are constantly developing.SKU: PTZ-Extreme-V2
There are no reviews yet.