Lectrosonics R400A UHF Diversity Receiver

SKU: #R400A
Lectrosonics

Features

  • 6-Channel Modular Configuration, 1 RU
  • Ratio/Antenna Phase-Diversity Reception
  • 231 MHz Bandwidth
  • IQ Dynamic Tracking Filters
  • Emulation Modes for Analog Transmitters
  • Built-In Antenna Multicoupler
  • IR Port for Quick Transmitter Setup
  • Ethernet, USB & RS-232 Interface Ports

$1,258.00

Lectrosonics R400A Overview

Designed for fixed installation, the Lectrosonics R400A receiver is a half-rack unit featuring Lectrosonics’s digital hybrid technology. The dual antennas are an confirmation of its Smart Diversity enhanced reception circuitry. The rear panel features both XLR and 1/4″ phone output connections, both with output level control adjust. A comprehensive LCD displays pilot tone, antenna phase, transmitter battery status, audio level, RF level, battery timer, frequency, and transmitter switch settings.

Digital Hybrid Technology

Digital Hybrid technology digitizes the audio signal at the transmitter end. The signal is then converted to analog at the receiver end, eliminating analog compandor circuitry. The result is accurate transmission with great range, without noise caused by analog compandors.

SmartTune Frequency Selection

SmartTune automatically scans for usable frequencies within the systems frequency block.

SmartDiversity Reception

Incoming radio frequency level and rate is carefully analyzed in order to determine the optimum timing for phase switching. The result minimizes drop-out and radio frequency interference.

Compact Profile

The R400A utilizes microprocessor components, attributing to its small size. The optional RMPR400-1 / RMPR400-2, rack-mount kits enable mounting single or dual units into a 19-inch single rack space.

SKU: R400A Category:
Weight 1045 g
Dimensions 359 × 270 × 107 mm
Brand

Type of Receiver R400
RF Carrier Frequency Range Frequency Block 19
Approx. Working Range Not Specified by Manufacturer
Overall Frequency Response 30Hz to 20kHz (+/- 1dB)
Signal-to-Noise Ratio @ receiver output (dB)-
SmartNR Off: 103.5dB
SmartNR Normal: 107dB
SmartNR Full: 108.5dB
# Of Channels 256 User Selectable UHF Frequencies
Type of Output(s) Balanced: 3-pin XLR
Unbalanced: 1/4″ Phone
Headphone Monitoring No
Power Requirements Minimum 8 to maximum 18VDC; 1.6W, 200mA maximum
Battery Type/Approx. Life Not Applicable, DC Power Only
Display LCD Main Window:
Pilot tone; antenna phase, transmitter battery status, audio level, RF level, battery timer, frequency, and Transmitter switch setting
Mounting Options Optional RMPR400-1 / RMPR400-2, single and dual unit rack mount kits.
Antenna Type Antenna Type
Dimensions 5.50 x 1.75 x 6.25″ (14 x 4.5 x 16cm) (WxHxD)
Weight 12.4 oz

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Lectrosonics R400A UHF Diversity Receiver”

There are no reviews yet.

SHOPPING CART

close