Lectrosonics M2R Digital IEM/IFB Receiver
SKU: #M2R
Features
- UHF IEM Receiver with Digital RF
- 24-Bit Digital Audio
- IR (Infrared) Port for Fast Setup
- High-Resolution, Color LCD
- Stereo or Mono Operation
- Low Latency of 1.4 ms with Analog Inputs
$1,415.00
Lectrosonics M2R Overview
Lectrosonics M2R Digital IEM/IFB Receiver from is a wireless receiver that employs antenna diversity and covers the UHF frequencies of 470.1 to 607.975 MHz. The receiver’s headphone jack is fed from a high-quality stereo amplifier and can be used when paired with an M2T wireless transmitter (sold separately) for driving headphones or earphones in live stage, theater, and performance applications.
The receiver can select from stereo, mono from left channel only, or mono from right channel only, giving the unit flexibility depending on its intended application. An intuitive mixing interface and high-resolution, color LCD on the beltpack receiver provide performing artists and monitor engineers with a comfortable and confident user experience.
Furthermore, the receiver’s built-in, antenna-diversity switching provides seamless audio during operation, and the 24-bit digital audio stream delivers high-resolution sound quality with a wide dynamic range, a low-noise floor, and solid stereo imaging. In addition, the M2R runs on two AA batteries for an operating time of over 4 hours (with alkaline batteries) and 7 hours (with lithium batteries).
| Weight | 442 g |
|---|---|
| Dimensions | 340 × 138 × 88 mm |
| Brand |
| Frequency | 470.1 to 607.975 MHz |
| Modulation Type | 8 PSK with forward error correction, spread spectrum |
| Occupied Bandwidth | 200 kHz |
| Latency | Digital Source: 1.0 ms Analog Source: <1.4 ms |
| Audio Inputs | Selectable: 4 x analog audio ins or Dante |
Audio Performance
| Frequency Response | 20 Hz to 15 kHz, -3 dB |
| Total Harmonic Distortion (THD) + N | 0.15% (1 kHz @ -10 dBFS) |
| Dynamic Range | >95 dB weighted |
| Adjacent Channel Isolation | >85 dB |
| Diversity | Type: Switched antenna |
Audio Output
| Earphone | 250 mW at 32 Ohms |
| Power Requirements | 2 x AA batteries (3.0 V) |
| Battery Life | 2 x alkaline AA (4 hours) 2 x lithium AA (7 hours) |
| Power Consumption | 1 W |
| Dimensions (H x W x D) | 3.0 x 2.4 x 0.625″ (76.2 x 60.3 x 15.9 mm) Height is 4.7″ (120 mm) with knob |
| Weight | 9.14 oz (259 g) with batteries |
There are no reviews yet.