Networked Audio Systems
Lectrosonics DNT22 – Dante 2 In/2 Out Interface
SKU: #DNT22
Features
- Add 2 I/O Channels to Dante Audio System
- Small Form Factor
- 3 Input Gains
- 24V Phantom Power per Channel
- Consumer and Pro Line Level Outputs
- Dual Power (DC or PoE)
$789.00
Lectrosonics DNT22 Overview
Lectrosonics DNT22 is a two input, two output Dante-based interface, and a convenient way to add up to two channels of Dante audio to an existing Dante-based networked audio system. The unit’s small form factor and PoE power capability make it easy to put Dante connectivity wherever it’s needed without the need for costly and interference prone analog wiring.
- Small form factor can be unobtrusively located near analog sources or sinks
- Dual power (DC or PoE) means the unit will work in systems with either standard or PoE Ethernet switches
- Three input gains accommodate common line levels, phantom power and dynamic microphones
- +24V Phantom power per channel – powers virtually all types of phantom powered microphones typically used in installed AV systems
- Two analog output gains to accommodate both consumer and pro line level requirements without overload
| Weight | 545 g |
|---|---|
| Dimensions | 250 × 132 × 49 mm |
| Brand |
| Analog Input | Balanced and RF filtered 3-pin depluggable microphone/line |
| Input Impedance | >1.8 kΩ @ any gain setting |
| Maximum Input Level | +8 dBu @ 0.0 dB gain -16 dBu @ +25 dB gain -31 dBu @ +40 dB gain |
| Input Gain | 0, +25, +40 dB, software selectable |
| Analog Output | Balanced line level with automatic muting on loss of Dante signal |
| Output Impedance | 200 Ω balanced, 100 Ω unbalanced |
| Output Gain | 0.0 or +10 dB, software selectable |
| Maximum Output Level | +12 dBu |
| Noise | EIN: 115 dBu @ +40 dB gain Output: <90 dBu @ 0.0 dB gain |
| THD | <0.01% @ any gain, input signal 3 dB below maximum |
| Phantom Power | +24V, software selectable |
| Network Connection | Dante/PoE: 100 Base-T Dante Ethernet |
| Compliance | PoE Class 0 802.3af PoE PD compliant |
| Certification | FCC Part 15 Class A, CE |
| Environmental | 32 to 104°F (0 to 40°C) |
| Power Requirements | +12 VDC, 500 mA DC power not required if used with a PoE Ethernet switch |
| Dimensions (WxDxH) | 6.5 x 3.5 x 1.1″ (165 x 89 x 28 mm) |
Based on 0 reviews
Be the first to review “Lectrosonics DNT22 – Dante 2 In/2 Out Interface”
Related products
-
Networked Audio Systems
Lectrosonics DNT0212 – Dante 2 In/12 Out Network Processor
Features
- 32 Inputs from Dante Receive Channels
- 16 Outputs to Dante Transmit Channels
- 2 Analog Line Level Inputs
- 8 Line Level Analog Outputs
- 4 Mic/Line Level Analog Outputs
- 48 Independent Automatic Mixers
- Support for Multi-Level Mixing
- Extensive Signal Processing
- Four Test Signal Generators
- Rack Mount or Under Table Mount
SKU: DNT0212 -
Networked Audio Systems
Lectrosonics DNT16i – 16 Analog Input Dante Network Processor
Features
- 32 Inputs from Dante Receive Channels
- 16 Outputs to Dante Transmit Channels
- 2 Analog Line Level Inputs
- 8 Line Level Analog Outputs
- 4 Mic/Line Level Analog Outputs
- 48 Independent Automatic Mixers
- Support for Multi-Level Mixing
- Extensive Signal Processing
- Four Test Signal Generators
- Rack Mount or Under Table Mount
SKU: DNT16i -
-
There are no reviews yet.